|
|
| Home Equipment Rental E-CRATE Truck & Trailer Product Catalog About Intranet Portal | |
 |
|||
 |
|||
WHEELS • Hub piloted • Pre-painted steel disc wheels (aluminum optional) AXLES • 5/8” thick axle walls • Premium brake linings • ABS brake system • Automatic slack adjuster ROOF • .040 aluminum or translucent • 16 ga. galvanized roof bows 24” O.C. • Two rivets per bow SIDE DOOR FRAMES • All galvanized door frame • Hidden frame covered with .050 pre-painted aluminum • Slotted header reinforcement plates SIDE DOORS • Fabricated doors (vs. Plymetal) • Aluminum frame • .050 pre-painted aluminum • Replaceable vinyl seals • Double seals top and bottom • Flush locks • Bolt-on hinges, stainless steel pins, nylon bushing • Drip cap • Slotted inserts to match post • Tapered door cams • Slotted keepers in door header and threshold |
STORAGE BOX • 10 ga. galvanized frame • Glasboard floor • Special center divider with end open for loading • Fabricated aluminum doors • Bolt-on aluminum hinges • Stainless steel ice breaker locks • Aluminum slats • Aluminum drip caps FRONT • 5” x 5” bevel corner • 10 ga. galvanized steel post full height • Covered with .050 pre-painted aluminum • Aluminum trim rail to match sides • All aluminum recessed nose box • Recessed gladhands • Quick release service gladhand • Switch and light on nose box for dome lights SUSPENSION • Hendrickson or Neway • Special reduced clearance to give maximum inside heights • Shock restraints • Heavy-duty shocks |
UNDER STRUCTURE • 4” I-beam cross sills 12” O.C. • 10” galvanized steel reinforcement angle, full length • Fully undercoated LANDING GEAR • Binkley 50,000# rating • Two-speed • C/S crank (R/S optional) • Sand shoes BOLSTER • 1/4” Hi-Ten steel bottom plate • Hardened king pin (no charge for special locations) • Conduit for air and light lines • Pre-primed • Unique front tube reinforcement SIDES • .050 prepainted aluminum • 12 ga. galvanized logistic side post 16” O.C. • Lining choices: White vinyl or varnished plywood |
REAR DOORS • Fabricated doors (vs. Plymetal) • Aluminum frame • .050 pre-painted aluminum • Replaceable vinyl seals • Five bolt-on powder coated hinges • Heavy-duty exterior lock rods REAR FRAME • Galvanized steel rear frame • 7 ga. x 14” deep rear sill • Aluminum light boxes • Lights recessed for protection • Knee irons in upper corners • 2” x 5” galvanized tube FLOOR • 1-3/8” S/L laminated hardwood • Crusher bead between boards • Screw holes filled and sanded • Two-coat polyurethane varnish (three if required) • Pre-undercoated LIGHTS • 12 volt system • No-splice wiring harness • Connection for extra marker lights molded into harness • Dual bulb marker lights • Sealed tail lights with rubber garment • 7 pole plug on nose with 20 amp circuit breakers |